Combined Boilers & Water Heaters
25
Product Description
• Very high performance combined boiler and water heater
• Stainless steel Tank-in-Tank design
• Choice of burner :
- Pressure jet natural gas or LPG (Riello)
- Pressure jet 28 sec or 35 sec oil (Riello)
• Can also be used as a stand-alone water heater
• Anti-Legionellae:hot water stored at a consistently high temperature
• Built-in primary circuit shunt pumps
• Fully insulated with very thick mineral wool
• Stove enamelled casing
• Control panel including thermostats,combined temperature
and pressure gauge,indicators and on/off switch
• 139 kW output and up to 2864 litres of hot water at 60
o
C
in one hour (HM150)
• 178 kW output and up to 3348 litres of hot water at 60
o
C
in one hour (HM200)
• Vented or unvented use,with mains pressure SystemPaks available
Project Reference
Allied Distillers,Glasgow
High temperature,high pressure hot water for a cleaning
process of stainless steel pipework which carries blends
of whisky.After each blend the pipework is blasted with
hot water at up to 70
o
C and at high pressure for 20
minutes at 3 litres a second before the next blend can be
sent through the pipework.Four HeatMaster 150 and
one Jumbo 1000 tank for each of the 2 processing areas.
HeatMaster® 150 - 200
HeatMaster®
150 - 200
5
1
2
3
4
6
7
9
10
11
12
8
1. Stainless steel inner tank
2. Primary heating circuit
3. Flue pipes with stainless steel
turbulators
4. Rigid polyurethane foam
insulation
5. Primary drain connection
6. Combustion chamber
7. Combustion chamber plate
8. Flue connection
9. Primary water flow
connection
10. Primary water return
connection
11. Domestic cold water inlet
12. Domestic hot water outlet
To Next Page
Loading...
