Combined Boilers & Water Heaters
19
Product Description
HeatMaster® 30
1. Stainless steel inner tank
2. Primary heating circuit
3. Flue pipes with stainless
steel turbulators
4. Rigid polyurethane
foam insulation
5. Primary shunt pump
6. Combustion chamber
7. Atmospheric natural
gas/LPG burner
8. Control panel
9. Primary water flow connection
10. Primary water return
connection
11. Domestic cold water inlet
12. Domestic hot water outlet
13. Flue connection
8
1
5
7
6
10
2
4
3
9
12
13
11
HeatMaster® 30
• High performance combined boiler and water heater
• Stainless steel Tank-in-Tank design
• Atmospheric natural gas/LPG burner with electronic ignition
• Anti-Legionellae :hot water stored at a consistently high temperature
• Built-in primary circuit shunt pump
• Fully insulated with rigid polyurethane foam
• Stove enamelled casing
• Control panel including thermostats,combined temperature and pressure gauge,
indicators and on/off switch
• 34 kW output and up to 696 litres of hot water at 60
º
C in one hour
• Vented or unvented use,with mains pressure SystemPaks available
To Next Page
Loading...
