9
Hot Water Storage Tanks
7
• Tank-in-Tank floor standing indirect hot water storage tank
• Stainless steel construction - no need for sacrifical anodes
• High performance - fast heat up and rapid recovery
• Fully insulated with mineral wool
• Stove enamelled steel casing,supplied separately to enable the
tank to pass through standard 800mm doorways
• Two sizes - 800 and 1000 litres
• Can be used in battery formation for high output installations
• Vented or unvented use,with mains pressure SystemPak available
• Large heating surface area means reduced boiler cycling
Product Description
Jumbo
1. Stainless steel inner tank
2. Steel outer tank
3. 120 mm thick mineral wool
insulation
4. Primary water return
connection
5. Primary water flow
connection
6. Domestic cold water inlet
7. Domestic hot water outlet
8. Control thermostat
9. Thermometer
10. Thermostat pocket
11. Thermometer pocket
12. Primary air vent
13. Metal casing
14. DHW recirculation or
temperature and pressure
relief valve connection
14 12 76
13
9
8
1
2
3
5
11
10
4
Jumbo
To Next Page
Loading...
