Hot Water Storage Tanks
• Tank-in-Tank floor standing indirect hot water storage tank
• Stainless steel construction - no need for sacrifical anodes
• High efficiency - fast heat up and rapid recovery
• Fully insulated with rigid polyurethane foam insulation
• Stove enamelled casing complete with control panel
• One model providing 606 litres total capacity
• Can be used in battery formation for high output installations
• Vented or unvented use,with mains pressure SystemPak available
• Large heating surface area means reduced boiler cycling
Product Description
HR601
1. Domestic cold water inlet
2. DHW recirculation or
temperature and
pressure relief valve
connection
3. Primary air vent
4. Domestic hot water
outlet
5. Primary water flow
connection
6. Thermometer pocket
7. Thermostat pocket
8. Primary water return
connection
9. Rigid polyurethane foam
insulation
10. Steel outer tank
11. Stainless steel inner tank
12. Stove enamelled metal
casing
13. Thermometer
14. Control thermostat
1 2 3 4
14
13
12
11
10
9
5
6
7
8
75
HR 601
To Next Page
Loading...
