174
When the exams have been loaded you can browse them by the down and up button of the
joystick and select the exam you want.
Exam results
After you have accomplished the measurement you can observe the Lens Centering by
clicking the right button, it will take you to the main screen of the Application. The main
screen of the Application shows the measure image and it positions the measure axes in a
default place, that is: the horizontal axis aligned between the two pupils keeping their base
tilt, whereas the two studs are positioned equidistant from the centre.
Lens Centering system allows to position and tilt the axes in order to do the measuring.
If the measuring isn’t valid or if it has been loaded another measure of a different App you
will see on the display an error message that means the positions of the pupils are not
present or an essential data for the measuring.
To Next Page
Loading...
