What to do if there is no output from CS4 call station on Adastra Amplifier?
- MMargaret RodriguezSep 12, 2025
If there's no output from the CS4 call station connected to your Adastra Amplifier, ensure the paging mic is correctly connected and the mic level is turned up. For Aux input, check that the input is playing and the Aux level is turned up. If the cable run is longer than 100m, connect a 24Vdc power supply. Verify that the required zones are selected and the level is not turned down, and ensure that the priority of another CS4 is not set to override.













