ADCMT 823B Series User Manual

8230 Optical Power Meter Operation Manual
A-3
A.2.1 Causes of the Generated Calibration Errors
Table A-3 Causes of the Generated Calibration Errors
No. Cause Command
Displayed
err code
Status Remarks
1 The IV offset calibration is not conver-
gent.
XIVC Err 10 ERR Bit7 ON
2 The difference between the VIG gener-
ation value, which is input when the
zero or full calibration is performed,
and the measurement value exceeds
50% of the full scale.
The measurement value exceeds the full
scale when calibrating.
XPC Err 10 ERR Bit7 ON
3 The full calibration is performed with-
out zero calibration.
XPC Err 15 ERR Bit13 ON Command execution error
4 The VIG generation value is not within
the input range.
XPC Err 15 ERR Bit13 ON Command execution error

ADCMT 823B Series Specifications

General

Brand	ADCMT
Model	823B Series
Category	Measuring Instruments
Language	English