Additel 686 - Page 35

27
Device No.
Read only parameter
Writing protection
Read only parameter
Universal version
Read only parameter
Software version
Read only parameter
Hardware version
Read only parameter
Device version
Read only parameter
Sensor
Sensor SN
Read only parameter
Sensor unit
Read only parameter
Sensor lower limit
Read only parameter
Sensor upper limit
Read only parameter
Sensor minimum range
Read only parameter
Device output
Primary variable/range
unit
It can be changed to any unit supported by the transmitter, and the upper and lower
limits will be displayed along with the conversion during modification.
PV range lower limit
Cannot exceed the lower limit of the sensor
PV range upper limit
Cannot exceed the upper limit of the sensor
Conversion function
Can be modified to linear or square root
Damping
Device data filtering time, the unit is S
Polling address
The default is 0, supports integer input, and the range is 0~15