Analog / digital
speed input
CD19
Setting Range 0 ~ 1
Default value 0
0 : Analog command is from pannel/F306 VR or H M L terminal.
1: Digital command is from panel or F306 and worked with
CD28/29 or CD34/35 setting.
39
Address setting
CD21
Each drive must have unique identified address if they are con-
trolled by RS-485 communication. Each address cannot be dupli-
cated.
Transmission
speed
CD22
Setting the transmission speed between computer and drive.
0 : 2400 bits/second.
1 : 4800 bits/second.
2 : 9600 bits/second.
3 : 19200 bits/second.
Setting Range 0 ~ 3
Default value 3
Setting Range 1 ~ 255
Default value 1
To Next Page
Loading...
