1. Preface
Thank you for purchasing ADLEEPOWER AM Brushless DC motor
and BL drives. Please read this manual thoroughly before installa-
tion and operation.
This manual should be stored by the user for maintenance refer-
ence and inspection.
Indicated a potentially hazardous situation which,
if not avoided, could result in death or serious
personnel injury.
Indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate
personnel injury and damage to equipment.
Danger
Caution
!
Danger
Only commence wiring after verifying that the power supply is turned
OFF.
Wiring should be performed only by qualified personnel.
Make sure to connect the ground terminal. Ground resistance 0.1
or less.
Do not measure any element signal during operation. Failure to observe
this caution can result in personal injury.
Perform maintenance or inspection only after verifying that the
CHARGE LED goes OFF 5 minute and after the main circuit power
source is turned OFF.
Never modify the product. Failure to observe this warning can result in
an electrical shock or personal injury and will invalidate the guarantee.
!
1
Caution
Mount the driver on nonflammable material.(i.e. metal)
When mounting units in an enclosure, install a fan or other cooling
device to keep the intake air temperature below 45 .
Overheating may cause a fire or damage to the unit.
To Next Page
Loading...
