– 14 –
Quick Start (cont’d)
Viewing Current Alarms
During an alarm (excluding holdup, hostage and duress alarms), the
operating panel will display the current alarm by type and point description.
? 1 Fire Alarm
Smoke Detector
No Other Alarms
Continue
1.
Using the operating panel’s numeric keypad, enter a valid ID code to
display the Action Menu 1 (see page 19) if no burglary groups are on; or
press the “Turn off” selector button (if burglary groups are on) to
deactivate all annunciating devices.
2.
If burglary groups are on, complete the steps under “Turning Off
Burglary Protection” in the
SYSTEM OPERATION
section. When all
burglary groups are off, press
Continue
to display Action Menu 1.
3.
Press
See alarms
to display the alarm type, point number, and
description.
4.
Press
Prev
or
Next
to display additional alarms.
5.
Press
Quit
to display Action Menu 1.
To Next Page
Loading...
