– 66 –
System Operation (cont’d)
Description Alpha ADEMCO
CID
Access
2-Man 2
ND
Person ACCESS 2ND
Keypad Lockout KEYPD LOCK
Cardreader Irregular Access IRR ACCESS 436
Manual Pushbutton Access – remote arm/disarm opening MAP ACCESS
Access Denied Code Known – access denied DENIED NA 421
Access Denied Code Unknown – access denied INVALID NA 921
Dialer Test
Dialer Test Report DLR TEST 602
Dialer Test Report with System Trouble Present TBL TEST 608
Bypassing/Unbypassing Burglary Protection
Bypassing a point or part of the burglary protection will cause the system to
ignore that point or portion of protection until it is unbypassed (restored to
normal operation) or the system is turned off.
Bypassing may be required to ignore a malfunctioning device or to allow
access to permanently secured areas. Only those users assigned the privilege
level of "Can Bypass BA" may bypass and unbypass protection.
Bypassing Protection Points
Note: A bypassed point cannot detect intrusion or an alarm condition.
Before resorting to bypassing a point, attempt to repair or correct the
problem.
1.
Using the operating panel’s numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Can bypass BA."
2.
Press
More
twice to display Action Menu 3.
3.
Press
Bypass
to display the Bypass Selection Menu 1.
To Next Page
Loading...
Need help?
General
