– 37 –
System Programming (cont’d)
5.
Press
Delete
to delete the User Name, ID code, Burglary group access,
privilege levels, card/key code, and cancel date.
Note:
If
Delete
is not
displayed, contact ADT for removal of this user from the system.
6.
Press
Continue
to display the User Selection Menu again.
To delete other users, repeat steps 4 through 6.
7.
Press
Quit
to display Action Menu 4.
Assigning or Changing User Access
Use the following steps to assign or change a user’s access to burglary
groups, privilege levels, ID code, card/key code, and/or code and card cancel
date.
1.
Using the operating panel’s numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Can change names."
2.
Press the
More
button three times to display Action Menu 4.
3.
Press
ID codes
to display the User Selection Menu.
Note:
If
ID codes
is
not displayed, you do not have privilege level of "Can change names."
Consult your manager or ADT Service Representative.
User Selection Menu
? User Name
User xxx Delete
Prev Change
Quit Next
4.
Press
Prev
or
Next
to display the specific user name and user number to
be changed or added.
Hint: To go directly to the user, enter the one- to three-digit user number
on the numeric keypad.
5.
Press
Change
to display the desired user name.
To Next Page
Loading...
Need help?
General
