– 23 –
Quick Start (cont’d)
EXERCISE: BYPASS/UNBYPASS PROTECTION POINTS
Enter your ID code and press
More
twice to display Action Menu 3.
Choosing
Bypass
leads you to the
Bypass
selection menu. (You must
have a Bypass BA privilege. If not, you will not see Bypass). Selecting
Burglar
will bring you to the Group Selection menu for the BA groups.
You may now scroll through the list of your burglary groups using the
Previous
and
Next
selections. (This is automatically skipped if only
one BA group is being used). Choose one of the groups and press the
key next to the name of the group to display the Bypass Submenu.
Choose
Bypass points
to display point number, status, description,
and additional selector keys. Use
Previous
and
Next
to navigate
through a listing of specific points. To choose a point, press
Bypass
.
(Notice that Bypass changes to Unbypass.) Unbypass that point by
pressing
Unbypass
. Press
Quit
to return to Action Menu 1.
? Bypassing:
Bypass points
See limits
Quit Bypass VVS
EXERCISE: HISTORY LOG
Enter your ID code and scroll to Action Menu 3. To display the last
500 events by date, time and type, press
History
and select
On this
screen
. The most recent event is displayed first.
PgDn
displays
additional information about an event, including the user name,
point, and group descriptions.
PgUp
returns you to the original
information. To scroll through the events, use
Prev
and
Next
. At any
time you may select
Quit
to return to the History Selection Menu. To
obtain a hard copy of the history log, select
On printer
from this
menu. Pressing
Quit
again will return you to Action Menu 1.
To Next Page
Loading...
Need help?
General
