ADT FOCUS CADET User Manual

– 43 –
System Programming (cont’d)
6. Press
Change time
to display the time currently set in the system.
7. Using the operating panel’s numeric keypad, enter the new time.
Note: Those users who have been assigned only the privilege level of
“Change temp sched” are limited to time changes within 5 minutes of the
current time displayed on the screen.
8. Press
AM
or
PM
to complete your entry and display the new time and
date.
9. Press
Quit
to display the Time Selection Menu.
Changing the Current Date
Perform the first 5 steps under the previous heading
Changing the Current
Time
and then continue with step 6 here.
Note: Before changing the time or date, turn off all BA groups.
6. Press
Change date
to display the date currently set in the system.
7. Using the operating panel’s numeric keypad, enter the new date.
Example: October 7th, 1998 is entered as 100798.
8. Press
Enter
to complete your entry and display the new date and time.
9. Press
Quit
to display the Time Selection Menu.
Setting Dates for Daylight Saving Time
Your FOCUS

CADET security system will automatically adjust the real-
time clock for daylight saving time on the two dates programmed into the
system. To program those dates do the following:
1. Using the operating panel’s numeric keypad, enter a valid ID code that
has been assigned the privilege level of "Change perm sched" or "Change
temp sched."
2. Press
More
twice to display Action Menu 3.
3. Press
Time
to display the Time Selection Menu.

ADT FOCUS CADET Specifications

General

Brand	ADT
Model	FOCUS CADET
Category	Security System
Language	English