– 48 –
System Programming (cont’d)
For maximum security, the Auto On/Off feature is not recommended. If Auto
Off is enabled, burglary protection will automatically be turned off
regardless of unforeseen events, possibly allowing unauthorized personnel to
enter the premises. If Auto On is enabled, burglary protection will
automatically be turned on, which could lead to the generation of a false
alarm if personnel are within a protected area.
There are four Auto On/Off options that you may select from. It is
recommended that you discuss these with your ADT Service Representative
to determine which one, if any, would be appropriate for your particular
application.
The four options are:
1. Manual on Manual off
2. Automatic on Manual off
3. Manual on Automatic off
4. Automatic on Automatic off
Manual:
The user must perform the on/off function.
Automatic:
The system automatically performs the on/off function.
The Auto On/Off feature is separately programmed for each group and daily
operating schedule. For example, you can select Auto Off for Burglary Group
1 on Saturday and Sunday only.
If your system was programmed with the Auto On/Off feature at the time of
installation, simply follow the steps under
Changing Daily Operating
Schedules
. Once you have entered AM or PM at step 13, the display will
indicate whether the system
can
or
cannot
turn itself on or off at that time.
15.
Press
More
to display the next daily operating schedule to be changed; or
press
Quit
to display the Time Selection Menu.
To Next Page
Loading...
Need help?
General
