– 55 –
System Operation (cont’d)
Action Menu 1
? Enter choice:
Lesson Turn on
See alarms Reset
Quit More
2.
Press
Turn on
to display Burglary group status.
3.
Press
All
to turn on all Burglary groups.
4.
Secure and exit premises prior to the expiration of the exit delay (if
applicable).
Turning On One or More Burglary Groups
Use this function to turn on certain groups and leave others inactive. This is
especially useful during opening and closing times. After turning off all
Burglary groups, the first person on site may wish to turn a few Burglary
groups back on before the rest of the employees arrive. For example, they
may re-activate door alarms, but leave motion detectors inactive.
Before turning on, be sure to secure (or bypass) all protection points.
1.
Using the operating panel’s numeric keypad, enter a valid ID code to
display Action Menu 1.
2.
Press
Turn on
to display Burglary group status.
3.
Press
Previous
or
Next
to display the specific Burglary group to be
turned on.
4.
Press the
“Group description”
button to turn on that specific group.
5.
Press
Continue
to display Action Menu 1.
6.
Repeat steps 2 through 5 to turn on additional groups.
To Next Page
Loading...
Need help?
General
