ADT FOCUS CADET User Manual

– 68 –
System Operation (cont’d)
7. Press
Bypass points
to display the point number, status, description,
and additional selector buttons.
8. Press
Prev
or
Next
to display the specific point to be bypassed.
9. Press
Bypass
to bypass the point displayed and to display the “unbypass”
selector button.
10. To bypass additional points, repeat steps 8 and 9.
11. Press
Quit
to display Action Menu 1.
Unbypassing Protection Points
Complete steps 1 through 7 under
Bypassing Protection Points.
Then perform
the following steps:
8. Press
Prev
or
Next
to display the specific point to be unbypassed.
9. Press
Unbypass
to unbypass the point displayed and to display the
“Bypass” selector button.
10. To unbypass additional points, repeat steps 8 and 9.
11. Press
Quit
to display Action Menu 1.
Bypassing/Unbypassing Vault Vibration Sensors (VVS)
Vault vibration sensors are sophisticated electronic sensors that are
sensitive to occupant and construction vibrations. If construction is
scheduled to end by the programmed "Latest Close Time," use the Bypass
VVS feature to automatically bypass
ALL
VVS detectors. At the "Latest
Close Time,"
ALL
VVS detectors will be
automatically
unbypassed.
Complete steps 1 through 6 under
Bypassing Protection Points.
Then perform
the following steps:
7. Press
Bypass VVS
or
Unbypass VVS
to bypass or unbypass vault
vibration sensors.
8. Press
Quit
to display Action Menu 3.

ADT FOCUS CADET Specifications

General

Brand	ADT
Model	FOCUS CADET
Category	Security System
Language	English