3.14.2 Change-Time
Allows the clock time to be changed.
If the current User ID does not have the necessary permission, the display prompts for entry of a password to
guard against inadvertent changes.
For example:
[SET TIME/DATE]
TIME = 15:28
DATE = 05/01/09 MON 5 JAN 2009
To change the settings, use the buttons to highlight the required option. Directly enter the new time or date
using the number buttons. As soon as a number button is pressed, the display will clear the current setting and
show the new value as it is entered. For example:
[SET TIME/DATE]
TIME = 1-:--
DATE = 05/01/09 MON 5 JAN 2009
If this panel is connected to a network, ALL panels on the network will assume this new value.
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
Loading...
