54
SMP0004.CSV Production Time Log – records the length of time the machine has been in production and gives
details on the length of time the machine has been in the modes listed below. (See Figure 3 - 52) The data
recorded in each column is as follows:
A. Date & Time—records the date and time the mode was switched.
B. Power On time—the length of time the power has been turned on.
C. Auxiliary mode time—the length of time the machine has been in Aux Mode.
D. Auto mode time—the length of time the machine has been in Auto Mode.
E. Manual mode time—the length of time the machine has been in Manual Mode.
F. Stop time—the length of time the machine has been in Stop Mode.
G. Setup time—the length of time the machine has been in Setup Mode.
H. Power On total cycles—the number of cycles made since the machine has been powered on.
I. Auxiliary mode cycles—the number of cycles made since the machine has been in Auxiliary Mode.
J. Auto cycles—the number of cycles made since the machine has been in Auto Mode.
K. Manual cycles—the number of cycles made since the machine has been in Manual Mode.
L. Setup cycles—the number of cycles made since the machine has been in Setup Mode.
Figure 3 - 52
SMP0005.CSV, SMP0006.CSV and SPM0007.CSV Event Logs – records every Bagger fault event during
operation, (See Figure 3 - 53). The data recorded in each column is as follows:
A. Fault description—the name of the error that has occurred.
B. Occurrence time—the initial time the occurrence happened.
C. Clear time—the time the error was acknowledged / reset. Note: Dashes (---) or asterisks (***) in a field
on the spreadsheet indicate no data was recorded for that error.
Note: There is a Backup Period on 1st of the month at midnight a new backup file with the event list is
created. Then old data is cleared from the buffer to start new month.
To Next Page
