EasyManua.ls Logo

Advanced Poly-Packaging T-1000 - Schematics

Advanced Poly-Packaging T-1000
142 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
86
Schematics
Electrical and Pneumatic drawings are provided along with descriptions to assist in troubleshooting the T-
1000-S14.
A. Electrical Drawings
110V Circuit
Circuit drawings are provided to assist in troubleshooting the functionality of the T-1000 and also the
interface signaling with auxiliary infeed equipment.
A circuit diagram of the 110V circuit is comprised of main power to the T-1000, through the fuse,
Corcom filter, motor controller, solid state relay, heater element, line out, and into the power supply
printed circuit board. See Dwg T1kST-E1_110VAC.
Analog Card, Temperature Controller, Heater Circuit
A circuit diagram of the Analog controller FPO-A21 with correct Dip switch settings is provided. See
Dwg T1kST-E32_A21. With a two Thermocouple inputs (TC1, TC2), the analog card has built in PID
and auto tuning functions with 16-bit resolution for very accurate temperature controls. See Dwg T1kST-
E32_A21.
Stepper Motor Circuit
A circuit diagram of the stepper motor controller is provided with correct Dip switch and Pot settings.
See Dwg T1kST-E4.
High Voltage Board Assembly
APPI manufactures the printed circuit board for accurate and consistent perforation detection, for accurate
bag positioning and registration. A circuit diagram is provided for this PCB.
Aux Interface
APPI provides for a closed loop signal with auxiliary infeed equipment. The circuit diagram references
the pinouts on Aux 2 connector, located on the T-1000 rear electrical panel (military connector). See
Dwg T1kST-E7.
Solenoid Valve Circuit Diagram
The T-1000 is equipped with an expandable Valve manifold, pre-wired for up to 7 options solenoid
valves. Valve stations 1 through 4 are standard, and valve station 5-11 are options. PLC output
information, DB25 pin outs, voltages and valve descriptions are provided on this circuit diagram. See
Dwg T1kST-E8.
PLC Expansion Inputs and Outputs
The T-1000 comes equipped with a PLC Expansion, where standard options are wired into the bagger.
See T1kST-E10_EXP-IO.
DB connector circuit drawing
T1kST-E14_DBCon
Panasonic Light Curtain SF4C
The T-1000 has the option of having a light curtain installed as an extra safety measure. See T1kST-
E34_LC_Panasonic SF4C.
Barcode Verifier
The T-1000-S14 has the option of a Barcode Verifier installed to scan labels. See T1kST-
E35_BCV_Keyence SR.

Table of Contents

Other manuals for Advanced Poly-Packaging T-1000