1.2.5 Built-in real-time clock and watchdog timer ................................ 1-3
1.2.6 ADAM-5510/P31 Remote I/O .................................................... 1-3
1.3 System Configuration............................................................... 1-3
1.3.1 LED Display ............................................................................... 1-4
Chapter 2 Installation Guidelines ............................... 2-1
2.1 Starting up ADAM-5510/P31 ................................................... 2-2
2.2 Module Installation .................................................................. 2-5
2.3 I/O Slots and I/O Channel Numbering...................................... 2-6
2.4 Mounting ................................................................................. 2-6
2.5 Jumper Settings and DIP Switch Settings ................................ 2-8
2.6 Wiring and Connections .........................................................2-11
2.7 LED Status of the ADAM-5510/P31 Unit ................................2-13
2.8 I/O Modules Configuration .....................................................2-13
2.9 Remote I/O Wiring...................................................................2-14
Chapter 3 System Specifications ................................3-1
3.1 Overview .................................................................................. 3-2
3.2 Major Features ......................................................................... 3-2
3.3 Technical Specifications of the ADAM-5510/P31 System ....... 3-3
3.4 Basic Function Block Diagram ................................................. 3-6
Chapter 4 I/O Modules ................................................. 4-1
4.1 RTD Input Module ................................................................... 4-2
4.2 ADAM-5013 RTD Input Resistance Calibration ...................... 4-5
4.3 Analog Input Modules ............................................................ 4-7
4.4 Analog Output Modules .........................................................4-15
4.5 Analog I/O Modules Calibration .............................................4-18
4.6 Digital Input/Output Modules ................................................4-24
4.7 Relay Output Modules ............................................................4-32
4.8 Counter/Frequency Module....................................................4-41
Chapter 5 Troubleshooting .........................................5-1