Advantech ARK-2150 - 3.5 Boot Settings

45 ARK-2150 User Manual
Chapter 3 BIOS Settings
3.5 Boot Settings
Figure 3.22 Boot Setup Utility
Setup Prompt Timeout
This item allows users to select the number of seconds to wait for setup activation
key.
Bootup NumLock State
Select the Power-on state for Numlock.
Quiet Boot
If this option is set to Disabled, the BIOS displays normal POST messages. If
Enabled, an OEM Logo is shown instead of POST messages.
Option ROM Message
Set display mode for option ROM.
INT19 Trap Response
This item allows option ROMs to trap interrupt 19.