MIC-770 User Manual 18
2.4.4 Internal USB 2.0 Installation (Q SKU only)
1. Undo 4 screws and remove the bottom cover.
2. Loosen the screws and adjust bracket size in accordance with the USB dongle
size.
3. Replace the bottom cover and secure with screws.
2.4.5 COM 3/4/5/6 Ports Installation
MIC-770 has support two standard RS-232/422/485 serial ports. If more serial ports
are needed, MIC-770 can expand up to four serial ports by cable (RS-232 only).
There is one DB9 cable in the accessory box.
1. Undo 4 screws and remove the bottom cover.
2. Replace baffle plate for COM 3/4 and COM5/6.
3. Remove HDD tray.
4. Assemble DP9 connector in baffle, and install cable at COM3/4 and COM5/6
connector.
5. Secure COM module in system and replace HDD tray/bottom cover.
To Next Page
Loading...
Need help?
General
