Advantech MIC-770 - Figure 3.43 USB Configuration

MIC-770 User Manual 58
 SATA Controller Speed
Indicates the maximum speed the SATA controller can support by selecting
Default, Gen1, Gen2, Gen3.
 Port 0~5
Enable or Disable SATA port 0~5.
 Hot Plug
Enable or Disable SATA Hot-Plug
 Spin up Device
Enable or Disable spin up device
 SATA Device Type
To identify the SATA that is connected to a Solid State or Hard Disk Drive.
3.2.3.8 USB Configuration
Figure 3.43 USB Configuration
 XHCI Compliance mode
Option to "Enable or Disable" XHCI compliance mode. Default is to disable com-
pliance mode.