Advantech WISE-4050/LAN - Wise-4060; I;O Specification

WISE-4000 User Manual 32
2.9 WISE-4060
2.9.1 I/O Specification
 Digital Input
– Channel: 4
– Logic level
–Dry Contact 0: Open
1: Close to DI COM
–Wet Contact 0: 0~3 V
DC
or -3~0 V
DC
1: 10~30 V
DC
or -30~-10 V
DC
(3 mA min.)
– Isolation: 3,000 V
rms
– Supports 32-bit Counter Input Function (Maximum signal frequency 3 kHz)
– Keep/Discard Counter Value when Power-off
– Supports Frequency Input Function (Maximum frequency 3 kHz)
– Supports Inverted DI Status
 Relay Output
– Channels: 4 (Form A)
– Contact Rating (Resistive Load)
–250 V
AC
@ 5 A
–30 V
DC
@ 3 A
– Relay On Time: 10 ms
– Relay Off Time: 5 ms
– Insulation Resistance: 1 GΩ min. @ 500 V
DC
– Dielectric Strength
–Between Contacts: 1000 V
AC
(1min)
–Between Coil to Contact: 3000 V
AC
(1min)
– Maximum Switching: 60 operations/minute
– Supports Pulse Output
– Supports High-to-Low and Low-to-High Delay Output