87 WISE-4000 User Manual
Chapter 4 System Configuration
4.3.2 Configure WISE-4000
1. Configure the computer’s IP address as the same domain as WISE-4000 mod-
ule. For the new WISE-4000/LAN Series which default IP address is 10.0.0.1,
the IP address of computer can be configured as 10.0.0.99 for example as fol-
lowing.
2. Open the Adam/Apax .NET Utility then you can see the IP address of computer
been shown under “Ethernet” tree. You can right click to refresh the subnodes of
this tree. Or click “Search Device” to find WISE-4000 module.
3. Users can also right click the IP address to find WISE-4000 module.
To Next Page
Loading...
Need help?
General
