WISE-4000 User Manual 70
You can enable SNTP, so the module can act as an SNTP client to perform time syn-
chronization from an assigned SNTP server.
– Modbus Address
In order to provide users with more flexibility and scalability in deploying modules. It
removes the limitation of the Modbus address setting and make it configurable as
user's need. There are two Modbus address sections (0X and 4X) for you to config-
ure each function item.
– General Configuration
The Scan Interval decides the I/O polling interval in the next part of the “I/O Status”.
This value will not be saved into the module, so it is only valid until the power is
switched off. The FSV by Communication WDT decides whether to enable the FSV
function triggered by communication with WDT. Enable the FSV function for the
entire module's output channels here.
– Account Management
Change the passwords of each account here.
To Next Page
Loading...
