WISE-4000 User Manual 78
After Cloud Configuration had been configured as a private server, you can go back
to the Logger Configuration page in Data Logger. Before switching Cloud Upload
to ON, you can configure the data upload criteria, and for I/O signal or system diag-
nosis individually. The criteria can be Item Periodic Interval mode for pushing data
by a quantity of data, or Time Periodic Interval mode for pushing data by a period of
time (Unit: 0.1 sec). If you don't want to upload the I/O or system data, choose Dis-
able. After the upload criteria have been configured, you can switch Cloud Upload
ON and start uploading.Then the data will be pushed to the cloud in *.csv file.
– Push Notification
For Cloud Logger functions Private Server, the data all comes from the local memory
of WISE, so you can see it from the WISE data logger and make a batch of data as a
file, then push it to the web server. Then push the latest data when the log condition
has been triggered, like the changes of DI status. The WISE module will push a noti-
fication in JSON format to the private server as configured above, and then you have
the latest WISE module data. You can switch the I/O Log or System Log ON, then
the WISE module will start pushing the latest logged data to the private server.
To Next Page
Loading...
Need help?
General
