Step 11
PreparingToSew
Note:
Inserting the bobbin case
Shuttle cover
Bobbin case
Latch
When you insert the bobbin case.
You must push the bobbin case as
far as it goes, and you can hear the
“Click”.
b: Make sure that the latch locates
into the notch at top of the shuttle
or race cover.
a: Raise the needle by turning the
hand wheel towards you.
Open the Shuttle Cover .
Hold the Bobbin Case by the
hinged Latch .
Insert the bobbin case fully into the
shuttle race and release the latch.
12
To Next Page
Loading...
