Care Of Your Machine
Step 1
Disconnect from supply mains and
switch off firstly.
Touch bulb after its cooling down
to avoid burning of hand.
Changing light bulb
(Model 585 only)
Note:
To dismantle the bulb:
Loosen the Screw .
Remove Face plate .
Anticlockwise rotate the old Bulb
to loosen the bulb.
To assemble the bulb:
Clockwise rotate the new Bulb
to tighten the bulb.
Assemble the Face plate .
Tighten the Screw .
Not place the machine in wet
environment, by heat source or
under direct sunshine.
Please clean the machine with
soft cloth and neutral soap.
Note:
Bulb
Screw
loosen tighten
24
To Next Page
Loading...
