AEG 110 - Drawing up the Bobbin Thread

Step 12
PreparingToSew
Note:
Drawing up the bobbin thread
Needle thread
Bobbin thread
-Make sure you have correctly
completed step 9 before staring
this step.
-Must rotate the hand wheel
anticlockwise, toward you.
Otherwise you can not draw the
bobbin thread.
a: Raise the presser foot. Hold the
Needle thread lightly with your
left hand and rotate the hand wheel
anticlockwise, toward you, for one
complete turn.
b: Bring the Bobbin Thread up
by pulling the needle thread.
c: Pull both thread 6" (15cm) under
and behind the presser foot.
13