23Operating the Oven
3 How to use the clock functions
• After a clock function has been selected, the corresponding function flashes
for about 5 seconds. During this period, the desired times can be set or modi
fied using the or button.
• When the desired time has been set, the function continues to flash for
approx. 5 seconds. After that the function is then lit. The set time begins to
run.
3 Checking the time set or remaining
Press the Select button repeatedly, until the appropriate clock function
flashes and the time set or remaining is displayed.
2 Using residual heat with the Cook time and End time
clock functions.
When the Cook time and End time clock functions are used, the oven
switches the heating elements off, when 90% of the time set or calculated has
elapsed. The residual heat present is used to continue the cooking process until
the time set has elapsed (3 to 20 mins.).
To Next Page
Loading...
