The MICRO 84 is a microprocessor-based programmable controller
designed to replace relay control systems that require 6 to 60 relays. In
addition, the MICRO 84 provides the following benefits:
l
Less expensive than an equivalent relay network
l
Easily programmed using simple relay ladder diagrams
l
Small-fits in an 8” deep NEMA 12 enclosure
l
Simple to install
. Easy to use and maintain
l
Designed for use in an industrial environment
l
User program remains intact even if power fails
l
Non-volatile memory (no battery required)
1-2
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
