AEG Protect D Series - Page 13

13
ELECTRICAL OUTPUT
Voltage regulation
Normal mode:
±
1%
Battery mode: ±1%
Efficiency
Normal mode:
> 98% (High Efficiency mode)
> 95%
Battery mode: > 93%
Frequency regulation
Normal
mode
: Sync with line ±10%
of nominal line frequency (outside
this range: ±0.1% of auto-selected
nominal frequency)
Battery mode: ±0.1% of auto-
selected nominal frequency
Nominal output
208V*, 220V, 230V, 240V (voltage
configurable)
6000/10000VA* 6000/10000W*
Frequency
50 or 60Hz, autosensing or
configurable as a frequency
converter
Output overload
100
-
105
%: no alarm
105-125 %: load transfers to Bypass
mode after 10 minutes
Output overload (Bypass mode)
100
-
105
%:
no alarm
105-125 %: continue working and
alarm
125-150 %: UPS shuts down after
30s
Voltage waveform
Sinewave
Harmonic distortion
< 1% THDV on linear
load
< 5% THDV on non
-
linear load
Transfer time
Online mode: 0 ms (no break)
High Efficiency mode: 10ms
maximum (due to loss of utility)
Power factor
1
Load crest ratio
3 to 1
Output connection
Hardwired
Output cable
Not provided
NOTE: * for 208V output, the load level will be derating to 90%.