Aerco E8 - Service Menu for Diagnostics

06/05/13 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288 Page 34 of 112
GF-115-C
Modulex E8 Controller and BCM
Operations and Maintenance Manual
OMM-0084_0D
DAY
Set currrent day
01 – 31
HOLIDAY Sub-Menu
This Sub-Menu sets the start and end dates for Holiday (Vacation) periods where no heat or
hot water is required.
YEAR
Set current holiday start year
XXXX
MONTH
START
Set current holiday start month 01 – 12
DAY START
Set current holiday start day
01 – 31
YEAR STOP
Set current holiday end year
XXXX
MONTH
STOP
Set current holiday end month 01 – 12
DAY STOP
Set current holiday end day
01 – 31
CLOCK CHANGE Sub-Menu
This Sub-Menu is used in areas where seasonal time changes are required for “Daylight
Savings“, etc.
MONTH
START
Set clock change start month 01 -12
DAY START
Set clock change start day
01 – 31
MONTH END
Set clock change end month
01 – 12
DAY END
Set clock change end day
01 – 31
RETURN
When CLOCK CHANGE reappears, press Program
Key.
4.6.2 SERVICE Menu
The SERVICE Menu contains all the test and diagnostic functions/values required for
Customer Service Engineers to troubleshoot the equipment in a timely manner. The SERVICE
Menu items are illustrated and described in Figure 4-6 and Table 4-6 respectively.
Some of the functions in this Sub-Menu require a valid Code No. (password) to be entered,
prior to accessing/changing Function values. When prompted by a “CODE NO.” display, enter
0000 (four zeros) by pressing the Program Key four (4) times. This will allow function access.