06/05/13 AERCO International, Inc. • 100 Oritani Dr. • Blauvelt, NY 10913 • Ph: 800-526- 0288 Page 90 of 112
Modulex E8 Controller and BCM
Operations and Maintenance Manual
8.5.1 DATE / TIME Sub-Menu
This Sub-Menu is used to set the time, date, holiday schedule and, where necessary, enter
clock change settings (daylight savings time, etc.).
NOTE
All items in the following DATE/TIME Menu must be entered in
sequence. Press the Program Key to step through the menu
functions. Use the Rotary Knob to adjust/change entries. Press
the Program Key to store entries and sequence to the next
function.
Table 8-5: GENERAL Menu / TIME/DATE Sub-Menu and Parameters
This Sub-Menu is used to set the time, date,
holiday schedule and, where necessary, enter
clock change settings (daylight savings time,
Set current time (min., hours)
YEAR Set current year XXXX
This Sub-Menu sets the start and end dates
for Holiday (Vacation) periods where no heat
or hot water is required.
Set current holiday start year
Set current holiday start month
Set current holiday start day
Set current holiday end year
Set current holiday end month
Set current holiday end day
This Sub-Menu is used in areas where
seasonal time changes are required for
Set clock change start month
Set clock change start day
MONTH END Set clock change end month 01 – 12
RETURN
When CLOCK CHANGE reappears, press
8.5.2 SERVICE Sub-Menu
The SERVICE Menu contains all the test and diagnostic functions/values required for
Customer Service Engineers to troubleshoot the equipment in a timely manner.
To Next Page
Loading...
Need help?
General