AERMEC NRP 0280 User Manual

14 Aermec cod. 5806715_00 12.01
NRP 0200-0750
EN
NRP
0200 0240 0280 0300 0330 0350 0500 0550 0600 0650 0700 0750
VT 00-P1-P2-P3-P4
17 17 17 17 17 17 13 13 13 13 22 23
01...08
13 13 13 13 13 13 10 10 10 10 22 23
P1|R1...P4|R4
17 17 17 17 17 17 13 13 13 13 22 23
GP HA ------GP2x2 GP2x2 GP2x2 GP2x2 GP2x3 GP10x3
HE GP3 GP3 GP3 GP4 GP4 GP4 GP2x2 GP2x2 GP2x2 GP2x2 GP2x3 GP10x3
TRX1 ALL ••••••••••••
ELECTRIC ACCESSORIES
DRE ALL
281
281
281
281 281 301 331 351 501 551 601 651 701 751
RIF ALL
54
54
54
54 50 50 50 51 52 52 53 53 53 53
AER485P1 ALL ••••••••••••
PGD1 ALL ••••••••••••
AERWEB300-6 TUTTE ••••••••••••
AERWEB300-18 TUTTE ••••••••••••
AERWEB300-6G TUTTE ••••••••••••
AERWEB300-18G TUTTE ••••••••••••
6. ACCESSORIES
6.1. MECHANICAL ACCESSORIES
VT ANTI-VIBRATION MOUNTS
Group of anti-vibration mounts.
GP PROTECTION GRIDS
Protect the external coil from blows and prevent access
to the underlying area where the compressors and the
chiller circuit are housed. Every kit includes two grids.
TRX1
The storage tanks with holes and integrative
resistances are delivered from the factory with plastic
protective caps.
Before the system is loaded, the plastic caps must be
replaced with the specific TRX1 if installation of one or
all the resistances is not foreseen.
6.2. ELECTRIC ACCESSORIES
AER485P1
RS-485 interface for supervising systems with MODBUS
protocol.
AERWEB300
Accessory AERWEB allows remote control of a chiller
through a common PC and an ethernet connection
over a common browser; 4 versions available:
AERWEB300-6: Web server to monitor and remote
control max. 6 units in RS485 network;
AERWEB300-18: Web server to monitor and remote
control max. 18 units in RS485 network;
AERWEB300-6G: Web server to monitor and remote
control max. 6 units in RS485 network with integrated
GPRS modem;
AERWEB300-18G: Web server to monitor and
remote control max. 18 units in RS485 network with
integrated GPRS modem;
PGD1
Graphical display, which allows complete management
of the unit like the one on board the machine. Can be
controlled up to 50 m away with a telephone cable, 200
m with a shielded AWG 24 cable.
DRE
Ini al star ng current reduc on electronic device, 26%
in dual circuit. Available only with 400V power supply.
Can only be applied in the factory.
RIF
Current rephaser. Connected in parallel to the motor, it
allows a reduc on of the input current (approx. 10%).
It can only be installed in the factory and so must be
requested on ordering.

AERMEC NRP 0280 Specifications

General

Brand	AERMEC
Model	NRP 0280
Category	Heat Pump
Language	English