38
17.10. SETTING OR CANCELLING A PROGRAMMED SWITCH ON
(HOUR ON)
The units have a timer with which it is possible to program
an activation by specifying how long before the activation
should take place (this time can vary from 0.5 to 24 hours). If
the unit is switched off (and no other programmed switch on
is present), by pressing the key you enter the time pro-
gramming mode (in this mode the flashes) and by pressing
the keys and it is possible to set the time after which
the unit is enabled; Pressing the button again confirms
the time and activates the timer programme.
If you want to cancel a programmed switch on, just press the
key to cancel the previous programming, after cancel-
lation the icon will disappear from the display of the remote
control
Setting a programmed
switch on
NOTE:
• Once a programmed switch on is set, the operating
mode, the working set-point and fan speed, will be
the same as those present when the unit stops.
• If after setting a programmed switch On the air con-
ditioner is manually switched on, the time setting is
cancelled automatically.
17.11. SETTING OR CANCELLING
A PROGRAMMED SWITCH OFF (HOUR OFF)
The units have a timer with which it is possible to program
an activation by specifying how long before the activation
should take place (this time can vary from 0.5 to 24 hours).
If the unit is switched on (and no other programmed switch
off is present), by pressing the key you enter the time
programming mode (in this mode the icon flashes) and by
pressing the keys and it is possible to set the time af-
ter which the unit is disabled; Pressing the button again
confirms the time and activates the timer programme.
If you want to cancel a programmed switch off, just press the
key to cancel the previous programming, after cancel-
lation the icon will disappear from the display of the remote
control
Set a programmed switch
off
NOTE:
If after setting a programmed switch Off the air conditioner
is manually switched off, the time setting is cancelled au-
tomatically.
To Next Page
Loading...
