EasyManua.ls Logo

AFi ISA - Installation Instructions; Damaged Shipments; Handling and Transport; Packing List

AFi ISA
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Original Instructions Rev.1.0 User Manual Isa 9/ 42
Installation Instructions
Shipment
AFI Centrifuge takes every reasonable precaution to assure that your ISA Centrifuge arrives without damage. Motor carriers
are carefully selected and shipping cartons have been specially designed to insure your purchase. However, damage can
occur in any shipment and the following outlines the steps you should take on receipt of a ISA Centrifuge to be sure that if
damage has occurred, the proper claims and actions are taken immediately.
Damaged Shipments
Terms are factory, unless stated otherwise. Therefore, it is important to check each shipment before acceptance.
If there is visible damage, the material can be accepted after the driver makes a notation on the consignee's copy of the
freight bill. Then an inspection must be made to verify the claim against the carrier. This inspection is the basis of your
filing the claim against the carrier.
If concealed damage is found it is absolutely necessary to NOTIFY THE FREIGHT AGENT AT ONCE and request an inspection.
Without this inspection, the transportation company may not accept a claim for loss or damage. If the carrier will not
perform the inspection, an affidavit must be prepared stating that he was contacted on a certain date and that he failed to
comply with the request. This along with other papers in the customer's possession will support the claim.
Handling and transport
The package containing the centrifuge needs to be handled by suitable means (pallet truck, etc.).
Please ensure that the people in charge of handling are qualified to handle the lifting equipment.
Maintain the following conditions during transport:
Temperature: -20 to 50 ° C
Relative humidity: <90%, under the dew point
Unpacking
Remove the cardboard packaging made of 2 parts (a lid and a bottom).
The ISA Centrifuge was packed with great care to prevent transport hazards. Before disposing of the packaging of the
centrifuge, and its spinning accessories, please make sure you are in possession of the following:
Packing list
ISA CENTRIFUGE
Compliance Certificate
User Manual
Power Cord
Rotor Fixing Wrench
Manual release key
Food grade grease
CAUTION
!

Table of Contents

Related product manuals