AFi LOREENA - Frequency of Lubrication; Access to Logbook; Access to Error Logbook

Originale Instructions- Rev.1.3 User Maunal– Loreena 30/ 68
4.12.3. Frequency of lubrication
Visual
Instruction
Control
Select how many cycles you want between each lubrication
reminder.
 No reminder (Not recommended)
 100 cycles (Default value)
 200 cycles
 300 cycles
Confirm
4.12.4. Access to logbook
Visual
Instruction
Control
The counters keep track of the life of the centrifuge.
 CYCLE COUNT: Quantity of cycles on the centrifuge.
 SWING-OUT CYCLE COUNT: Quantity of cycles ran with a swing-out rotor
 SWING-OUT CYCLE COUNT >4,000RPM: Quantity of cycles ran with a swing-
out rotor faster than 4,000RPM
 RUNNING HOURS: Amount of hours the centrifuge has been used.
 COLD MODULE RUNNING HOURS : Amount of hours the refrigeration has
been running
 COLD MODULE STARTS : Number of time the refrigeration has started
(compressor)
 LID OPENINGS: Number of lid openings
Return
4.12.5. Access to error logbook
Visual
Instruction
Control
The error logbook makes it easier to service and do maintenance
on the unit.
The messages are recorded per error number, making it easier to
save all the errors and how often they happen.
For more details on these error codes, refer to section 6.2.22.
Return