Originale Instructions- Rev.1.3 User Maunal– Loreena 36/ 68
4.13. Service Menu
4.14. Information
Access the menu through this icon :
This menu provides general information on the Software and
Hardware of the centrifuge :
SERIAL NUMBER: Unique identification number of the
centrifuge
Centrifuge fw: Software version of the microcontroller
Display fw: Software version of the display µController Board
Id: ID of the microcontroller electronic board
Power Board Id: ID of the electronic power board
Accelerometer Board Id: ID of the electronic board of the
accelerometer
Return
4.15. Energy saving
The "Postcool" function makes it possible to maintain a temperature in the chamber of the tank, after the rotor has stopped.
Stopping this function prevents over-consumption of electricity. This function is disabled ("OFF") by default.
This menu is only accessible to certified service companies.
Exit
An access code is required.
Only certified technicians are allowed to go further.
To Next Page
Loading...
