Service Guide 4
Agilent 35670A Supplement 51
A102 DC-DC Converter
This assembly is now a Power Inverter.
The following table lists signals routed between the A17 board
and the A102 Power Inverter. A description of each signal
follows the table:
VCC: 5 Volts
BLight_ON: Generated by U135 to turn on and off the display
backlights for power saver mode.
Page in original guide 9-37
VCC 1,2
Gnd 3,4,7,8
BLight_ON 5
To Next Page
Loading...
