Agilent 4155C/4156C VXIplug&play Driver User’s Guide, Edition 4 7-3
Sample Application Programs Using VEE
Introduction
Introduction
This section introduces the sample application programs for Agilent VEE that are
furnished with the 4155/4156, and covers the following sections:
• “Agilent VEE Sample Program Disk”
• “What are Sample Programs?”
Agilent VEE Sample Program Disk
The Agilent VEE Sample Program Disk stores sample application programs using
Agilent VEE and VXIplug&play drivers for the 4155/4156 and the E5250A. The
sample programs can control the 4155/4156, Agilent E5250A low leakage switch
mainframe, and the Summit series semi-auto prober from Cascade Microtech, Inc.
The following files are stored on the disk.
• readme.txt
This is a text file with a brief introduction of the sample programs, installation
information, and so on.
• sample1.vee and sample2.vee
These are program files that are executable on Agilent VEE (HP VEE version
4.0 or later). Refer to “What are Sample Programs?”.
• sample.ppd
This file is an example of data used to control the Summit series semi-auto
prober from Cascade Microtech, Inc. The *.ppd files will be created and used by
the prober control software (PCS) furnished with the prober or supplied from
Cascade Microtech, Inc. The sample application programs require the *.ppd file
and PCS to control the prober.
To Next Page
Loading...
Need help?
General
