Agilent 4155C/4156C VXIplug&play Driver User’s Guide, Edition 4 2-11
Driver Function Reference
Parameters
Table 2-8 PGU output voltage, resolution, and compliance by range
Table 2-9 PGU pulse period, pulse width, and delay time
Table 2-10 PGU leading transition time and trailing transition time
Output range
(actually used)
Output voltage
a
a. Parameter name may be base, bias, peak, stress, value, start, stop, and
so on.
Setting
resolution
comp value
b
b. Set any value (e.g. 0.1) though the compliance is always 100 mA.
20 V 0 ≤ |V| ≤ 20 V 4 mV ±100 mA
40 V 0 ≤ |V| ≤ 40 V 8 mV ±100 mA
period value width value
delay value
a
a. The value must be 0 ≤ delay ≤ period value.
Resolution
2.0 μs to 100.0 μs1.0 μs to 99.9 μs 0 to 100.0 μs0.1 μs
100 μs to 1000 μs1 μs to 999 μs 0 to 1000 μs1 μs
1.00 ms to 10.00 ms 0.01 ms to 9.99 ms 0 to 10.00 ms 10 μs
10.0 ms to 100.0 ms 0.1 ms to 99.9 ms 0 to 100.0 ms 100 μs
100 ms to 1000 ms 1 ms to 999 ms 0 to 1000 ms 1 ms
1.00 s to 10.00 s 0.01 s to 9.99 s 0 to 10.00 s 10 ms
Leading transition time
(rise)
Trailing transition time
(fall)
Resolution
100 ns to 1000 ns 100 ns to 1000 ns 1 ns
0.50 μs to 10.00 μs0.50 μs to 10.00 μs10 ns
5.0 μs to 100.0 μs5.0 μs to 100.0 μs100 ns
50 μs to 1000 μs50 μs to 1000 μs1 μs
0.5 ms to 10.00 ms 0.5 ms to 10.00 ms 10 μs
To Next Page
Loading...
Need help?
General
