Agilent 4155C/4156C VXIplug&play Driver User’s Guide, Edition 4 2-51
Driver Function Reference
Function List
Bias Mode hpe5250a_biasPort Selects the input bias port.
hpe5250_biasChanCard Selects the card for bias mode.
hpe5250_biasChanList Selects the channel list for bias mode.
hpe5250a_biasState Sets the bias port state.
hpe5250a_biasChanList_Q Queries for the bias channel list.
Couple Port hpe5250a_couplePort Selects the couple port.
hpe5250a_coupleState Sets the couple port state.
Route Control hpe5250a_closeList Closes the channel list.
hpe5250a_openList Opens the channel list.
hpe5250a_openCard Opens all output on the card.
hpe5250a_closeList_Q Queries for the channel list status.
hpe5250a_openList_Q
hpe5250a_closeCard_Q Queries for the closed channel list on the card.
C/G
Compensation
hpe5250a_CompenC Executes the C/G compensation.
hpe5250a_selectCompenFile Selects the compensation data file.
Diagnostics hpe5250a_testExec_Q Executes the relay/front-panel/controller test.
hpe5250a_testClear Clears the test result.
Passthrough
Functions
hpe5250a_cmd Sends a command.
hpe5250a_cmdInt Sends a command with an integer parameter.
hpe5250a_cmdReal Sends a command with a real parameter.
hpe5250a_cmdData_Q Sends a command to read any data.
hpe5250a_cmdString_Q Sends a command to read string response.
hpe5250a_cmdInt16_Q Sends a command to read 16 bit integer response.
hpe5250a_cmdInt16Arr_Q Sends a command to read 16 bit integer array response.
hpe5250a_cmdInt32_Q Sends a command to read 32 bit integer response.
hpe5250a_cmdInt32Arr_Q Sends a command to read 32 bit integer array response.
hpe5250a_cmdReal64_Q Sends a command to read 64 bit real response.
hpe5250a_cmdReal64Arr_Q Sends a command to read 64 bit real array response.
Category Function Description
To Next Page
Loading...
Need help?
General
