Maintenance 3
Maintenance 33
b
Using both hands, hold the oven ribbon heater on the
double- brad supports as shown in Figure 22.
Figure 22 Removing the oven ribbon heater
c Rotate the oven ribbon heater in a counterclockwise
direction until the feet come out of the slots, then
rotate the oven ribbon heater back and forth while
pulling up until the oven ribbon heater pops out.
d Wipe away any spills and vacuum any broken glass
from the oven ribbon heater.
10 Wipe away any spills and vacuum any broken glass from
the oven area. Be sure to check underneath the carousel
hub for debris.
Reassembly is the reverse of these steps.
The ribbon heater edges are sharp. Wear protective gloves to avoid
personal injury.
Parts of the ribbon heater are very fragile. Be careful when handling
to avoid accidental damage.
Double-brad supports
Ribbon heater tab
Slot
To Next Page
Loading...
