Agilent Technologies 83640B User Manual

SCPI COMMAND SUMMARY
 DIAGnostics:TEST[:EXECute] <num>
The specied selftest is executed. Normal instrument op eration is
suspended and the instrument state is restored upon exiting the
selftest mo de.
 DIAGnostics:TEST:LOG:SOURce ALL|FAIL
 DIAGnostics:TEST:LOG:SOURce?
Sets and queries the source for the raw data logging. ALL species
that all raw data p oints are displayed. FAIL selects only those data
points out of the test limits. Both commands are executable in
selftest mo de. After *RST, the setting is FAIL .
 DIAGnostics:TEST:LOG[:STATe]?
 DIAGnostics:TEST:LOG[:STATe] ON|OFF|1|0
Selects and queries the raw data logging ON/OFF switch. Both
commands are executable in selftest mo de.
After *RST, the setting is 0.
 DIAGnostics:TEST:LOOP ON|OFF|1|0
 DIAGnostics:TEST:LOOP?
Selects and queries the test lo oping ON/OFF switc
h. Both
commands are executable in selftest mo de.
After *RST, the setting is 0.
 DIAGnostics:TEST:NAME? [<num>]
Queries the name of a selftest bynumber. If the number is not
specied then an array of all the selftest names is returned.
 DIAGnostics:TEST:POINts?
Returns the number of p oints of selftest that is output using
DIAGnostics:TEST:NAME? or DIAGnostics:TEST:RESult? .
 DIAGnostics:TEST:RESult? [<num>]
Queries the result of a selftest, bynumber. The resp onse is a string
containing either Passed , Failed ,or NotRun .If < num > is missing,
an array of selftest results are returned.
 DIAGnostics:TINT? <num>
A test feature that returns the value passed to it. This is used to test
the GPIB interface.
 DISPlay[:STATe] ON|OFF|1|0
 DISPlay[:STATe]?
Sets and queries the display ON/OFF switch.
After *RST, the value is 1.
Operating and Programming Reference S-33

Agilent Technologies 83640B Specifications

General

Brand	Agilent Technologies
Model	83640B
Category	Portable Generator
Language	English