4-6
Printing, Plotting, and Saving Measurement Results
Defining a Print Function
Defining a Print Function
NOTE The print definition is set to default values whenever the power is cycled. However, you can
save the print definition by saving the instrument state.
1. Press .
2. Press or .
❏ Choose if you are using a black and white printer, or you want just
black and white from a color printer.
❏ Choose if you are using a color printer.
3. Press until the correct choice (ON or OFF) is highlighted.
❏ Choose if you want to print one measurement per page.
❏ Choose if you want to print multiple measurements per page.
NOTE Laser printers and some DeskJet printers do not begin to print until a full page, or a partial
page and a form feed, have been received.
If You Are Using a Color Printer
1. Press .
2. If you want to modify the print colors, select the print element and then choose an available color.
NOTE You can set all the print elements to black to create a hardcopy in black and white.
Since the media color is usually white or clear, you could set a print element to white if you
do not want that element to appear on your hardcopy.
To Next Page
Loading...
Need help?
General
