1- 31
Making Measurements
Using Markers
Figure 1-18 Example of a Fixed Reference Marker Using ()REF=()FIXED MKR
To Couple and Uncouple Display Markers
At a preset state, the markers have the same stimulus values on each channel, but they can be uncoupled
so that each channel has independent markers.
Press and select from the following keys:
• Choose if you want the analyzer to couple the marker stimulus values for
the display channels.
• Choose if you want the analyzer to uncouple the marker stimulus
values for the display channels. This allows you to control the marker stimulus values independently for
each channel.
Figure 1-19 Example of Coupled and Uncoupled Markers
To Next Page
Loading...
Need help?
General
